Questions & Answers for: replace ac blower motor 2000

...AC/Heat only works intermittently. I can turn the switch on but the fan doesn't turn on. It might be that way for weeks. Then out of no where it will work for a few days to a few hours. When it does ...

Ad

Question about 2002 Bonneville

1 Answer

...AC blower not blowing air There is heat, but no fan to blow it heck the blower fan speed control resistor, it is located near the blower motor, they are cheap to replace and the most common cause of ...

Ad

Question about 1997 Bonneville

1 Answer

...AC and no Blower. I checked power connector at the blower motor and is reading 1.5 Volts. you need new blower module located at blower under hood, against the firewall under the relays it has four or ...

it is loose. How to fix it? The noise is caused from a bad or dried up bearing. You will need to replace the whole blower motor Could we see how to replace the blower motor on 2003 Pontiace Bonneville

...ac replaced blower motor + 1992 bonneville sse w/ac replaced blower motor + control module and blower still runs on high will not shut off can't locate where resistor is, fuses + relays are good You ...

...ac fuses and they are good, the fuses said blower 1 and blower 2 so i would like to know where they are located so that i can see if its a blower problem, but its blowing but only blowing hot air No ...

Question about Air Conditioning and Heat for Pontiac Aztek

1 Answer

...AC button. The blower motor came on. Have a certified mechanic or someone you trust remove and do what I did. Most of the time this will fix the problem, if not, you'll need to replace the blower ...

how to replace a blower motor on a 2003 pontiac bonneville Were is the blower motor located in a 04 bonneville and what would I need to replace it

...noise when turn on heater/ac fan on 2000 pontiac bonneville fan works on all speeds but has loud vibrating noise either fan motor is going out ar broken fan wheel, or possibly loose fan

Question about 2000 Bonneville

1 Answer

blower motor and blower motor resistor and still nothing Were either of those two items bad Did you test them FIRST before you replaced them You have to get wiring diagrams FIRST----BEFORE you walk to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...