Question about 1985 F150
...dash lights are out and fuse box cover is missing... which one? Facing fuse box, left hand side, bottom fuse i have a 1985 ford f250 and the tale lights are out and i have no manual and the cover is ...
...lights and dash lights are on the same fuse and circuit. Could someone please email the wiring diagram for a 1990 f150? Mine I have brake lights reverse lights and signal but no park lights some of ...
...dash and brake lights not working I hooked up a trailer to my 1991 F150- now my interior lights and brake lights. I have checked all the fuses under the dash. The truck also idles up and down, shuts ...
...dash lights and radio what fuse # or don't have dash lights,/lights on heater control and radio doesn't work. what fuse # or solution 2002 F150 have replaced with new bulbs its normally a 10 amp fuse ...
...dash board lights do not work. The my 2002 f150 dash board lights do not work. The fuse looks good and replaced it anyway. The light bulbs are good and it is plugged in firmly in the back of the dash ...
...on. if i slightly push in switch park lights come on. i already replaced switch theres a loose wire behind the dash, normally the negative on f150, that why when you push it it makes the
...dash on the steering column there are two bolts that holt a square box onto the column. that is the ignition switch. may need to be slid down towrds the pedals. can be aggravating trying to fine ...
Question about 1998 F150 Regular Cab
...dash Replace the light switch in the dash. They get hot and melt. is it possible that someone has done electrical work on your truck recently if so they have tapped into the lighting control module ...
Question about 1998 F150 Regular Cab
...Bad joint in the instrument cluster See the links Ford F150 brake warning light issue resolved Ford F150 Brake Warning Light On 2009 ford f150 warning dash light comes on for the brakes Google ...
f150 now truck won't start. Theft light code is 15 I'd put the original dash back in or get it reprogramed for the f150. Then try drawing out trouble codes from the ecm, maybe replace it if called for
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions