...replace the air filter as soon as possible. memoWhen you replace the lamp, please replace also the air filter. Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at ...
it will zero out. If both lights are flashing orange, that means that the bulb needs to be replaced and the filter needs to be cleaned. Make sure you reset the counters for both after you replace them
Hitachi I dont have that meter?? but what can be??? ysus can't be because I have replaced that board and it didn't work xsus?? power board??? Main Logic Board ??? POWER FILTER BOARD??? DIGITAL ...
...To clean it, simply pull the filter out of the cover or housing and blow the dust out of it. Replace the filter and the cover, and then make sure to go into your menu and reset the filter
...images. ---Rick Replacing the filter should reset the timer. Make sure you used the correct replacement
high lamp temp Dismount dustfilter, carefully vacuum clean filter and filter aperture, then replacing filter and finally reset filter time in menu.
...replace the air filter when it is damaged or too soiled. When you replace the projection lamp, please replace the air filter . An air filter of specified type will come together with a replacement ...
...filter. 8. Replace the filter cover and snap it back into place. 9. Slowly turn the projector so that the top is facing up. 10. Turn the projector on, and reset the filter time using the FILTER TIME ...
Question about CP-X1250 Multimedia Projector
...resets the count of the lamp timer to 0. memo Perform this function only when you have cleaned or replaced the air filter. The filter timer counts the used time of the air filter after cleaning or ...
The filter needs replacing. Do you sell replacement filters for model CP-X1250? Take the filter to the local electronics repair shop and ask them for some filter material like the one in the unit. ...
Usually answered in minutes!
54 Questions
43 Questions
29 Questions
26 Questions
22 Questions