Questions & Answers for: replace ignition control module buick

...coils...i rented a OBD II autoscanner and it cant give a readout...help! The 95 lesabre was a split year it had obdII connector but read on obdI system. Have your ignition control module

...ignition module? yes have to be programed for your car. easier to buy a control mod at the junk yard thats out of a car like yours!! cheapest and easiest way! 99 buick lesabre, How do I replace the ...

...I bought one coil and tried it in each position with no improvement. It was the ignition control module. Mine is located under the three coils. A relatively easy item to replace. Cost about

i have replaced coil pack and still dont have spark so i need to know where ignition control module is located on 1990 buick lesabre with 3.8 v-6 You probably need a crank sensor.

replace ny 1995 buick lesabre ignition control module ... the ignition control module is mounted to the left cylinder head. more precicely, under the 3 coils Remove coils , remove harness bolt, unplug

...cam sensor, crank sensor, and ignition control module. next time it won't run after it heats up, spray or pour water in crank sensor and see if it will start. I have seen new crank sensors go

...symptoms. It ended up being the ignition control module. It cost around $150. It sits under the coils on my car. Had a somewhat large plug going into it. Not too difficult to replace. Hope that

...control module). Now if there is no power to one of the ignition coil pack youll have to replace the ignition module, It will be in your interest to replace that coil that has no power to

...ignition control module on 1994 buick lesabre, now it will start, but runs crappy also replaced crank sensor, cam sensor, all 3 coil packs, spaek plugs, and front 3 wires check fuel pressure are fuel ...

...Ignition Control Module, Engine Control Module (ECM/PCM), camshaft sensor, and crankshaft sensor. Any ideas? Did you have it on a scanner or just replaced parts? A scanner can read what the sensors ...