...ignition switch in 05 ram 1500 switch locked up and will not turn on. How do you get the old switch out to replace it. Step1 Disconnect the negative battery cable from the terminal on the battery. ...
...ABS mdoule and the wiring harness and that didn't work. Now they are saying it might be the ignition switch. Do you have any recommendations? Could be the ignition switch or the body control
...ignition switch test and only p0339 is showing up engine idles just fine until about 4000 rpm then sputters. Same when driving only at lower rpm. P0339 is Crankshaft Position Sensor A CKT ...
Question about 2005 Ram 1500
2005 dodge ram 2500 hemi. No gauges,no noise from starter, no box gear selector. Replaced batt and clamps, fuse box. Jump starter and cranks great. Have you tested the ignition switch itself ?
...ignition cylinder. If it even wiggles slightly, the switch assembly (on the left side of the column, under the plastic) is probably your problem. You can buy aftermarket replacements for about 50 ...
Question about 2005 Ram 1500
2005 Ram 1500 4.7 SLT. If I replace the ignition switch will I have to have the PCM flashed? usually if it has security system
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
