Questions & Answers for: replace low beam head lamp

low beam headlights not working on 2004 Pontiac Montana extended All of a sudden both low beam head lights on my 2004 Pontiac Montana ext. van stopped working. There seems to be no specific fuses for ...

Ad

...replace front light low beam blub? Hello i can assist you open your hood behind the head lamp lenses is a head lamp bulb socket twist it counter clock wise then remove the socket and bulb unplug your ...

Ad

Question about 2005 Dakota

1 Answer

...replace the whole bulb. Some cars have a separate high and low beam, some are together. Low beams usually burn out first since they get used more often and unfortunately have to be replaced even if ...

low beam head lamps are not working,But the high beams are working fine.I checked the fuses they are good.is there anything that i need t check? This is a recall issue on the 2004-2007 Forenza. You ...

Question about 2005 TrailBlazer

1 Answer

low beam headlights do not work low beam head lamps quit working but all others do If the high beams work check the bulbs the low beam felament maybe blownDid they both stop working at same time if so

Question about 2005 TrailBlazer

1 Answer

low beam head lamps quit low beams quit working but all others work and I replaced head lamp mod switch Check the low beem bulbs, they both might be burnt out.

...low beam headlight on drivers side of suzuki kazahi You need to remove the front bumper. It is easy but tricky. Once the bumper is off you need to remove all the plastic head lamp. You'll see the ...

...replace a head light unit on a 2001 suzuki esteem passenger side the whole assembly or just the bulb.? post symptoms? i was in a crash. the lamp is just out, low beam is dead. like that.??? in Europe ...

Question about 2006 Chevrolet Impala LS

1 Answer

...voltage circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the underhood fuse block. If all circuits test normal, test or replace the low beam

...is always OFF, test the control circuit for a short to voltage or open/high resistance. If the circuit tests normal, replace the BCM. If all circuits test normal, test or replace the low beam

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...