Questions & Answers for: replacing crank sensor 99 chevy

...chevy malibu that cranks but won't run changed fuel pump, and change engine computer, and moduler, and coil packs. replaced fuel filter, and checked all fuses. please if you can tell me some thing i ...

99 Chevy malibu 2.4L engine coolant temp sensor I have to replace the coolant temp sensor and I don't know where it is. I don't have much experience with engine work, so if you could dumb it down for ...

...store tells me that it could be a crank sensor. Where is this located and how do you remove and replace it? Is there an image or illustration of the location of this part? located near the ...

crank sensor located on a chevy malibu 2001 It should be down near the crankshaft pulley. Remove the the right front wheel and the splash shield, it should be there next to the pulley. the 3.1 engines

...99. hey the reason your gas gauge is going from full to empty is that your fuel pump which is in the gas tank has a sensor that relays how much gas the tank has in it, the sensor is gone bad and will ...

crank sensor, fuel filter, I know the fuel pump is working fine.. What can it be? You might have a defective fuel tank pressure sensor!  i sed a rubber hammer  taped the fuel tank,then ,when

where is crank sensor on 99 chevy malibu 2.4 engine where is crank sensor located on 99 malibu 2.4 engine should be under crankshaft pulley.

crank sensor location on 99 chevy malibu 2.4 engine whats the location of crank sensor on my 99 malibu 2.4 engine should be in crank pulley.

99 chevy malibu po453 problem replaced sensor twice cleared code problem code came back Which sensor have you replace. The impalas have about 5 02 sensors and you have to know which one to replace. If

crank sensor, but unplug mass air flow sensor on air filter tube see if it changes condition need to check if you have spark at the plugs if not might be module or crank sensor need a scanner to watch