Questions & Answers for: Ford reset button

reset button and wait for the "TIRE PRESSURE SET" light to illuminate. Continue to press the button for 3 seconds, then release. After 3 seconds, the low tire pressure warning lamp will flash 3 times,

...reset button but nothing seems to work Press the setup button until "press reset at oil change" is displayed. Then press and Release reset button until "hold reset to confirm" is displayed. Now press ...

reset button is stuckup try reset but firmly reset button is stockup try reset but firmly pressed, what remedy to this sometime drinks get spill onto the button or heat, dirt, dust cause plastic to ...

...RESET button to cycle to "SETUP MENU HOLD RESET". 2.) Now press and hold the button for 2 seconds until "RESET FOR SYSTEM CHECK" is displayed, then release. 3.) Imediately press and hold button for 2 ...

...reset button until cntr. displays"hold reset if new oil" #3press and hold reset button for 2 sec. and release oil life should read 100% #4 center displays"setup menu hold reset" base cluster #1 press ...

...reset" button to get rid of the message2) then hit the "Setup" button twice and you'll see the "oil life" screen, which is now at "0%".  It tells you what to do next (i.e. "hold reset" until ...

reset button, when button is said it means the trip/ rest button this is the only button you will use.1)push and release button untilSETUP MENU HOLD RESET is display 2) press and hold button until you

Reset button until "Setup Menu Hold Reset" is displayed. 2. Then press and hold down the Trip/Reset button for approximately 2 seconds until "Reset For System Check" is displayed then release the Trip

reset button when the dash showed "Oil change needed". but it did not reset the oil change. Thanks Sandy Press the setup button to access the system, then press and release the reset button,

...RESET button until the message center displays SETUP MENU HOLD RESET 2. Press and hold the TRIP/RESET button for 2 seconds until the message center displays RESET FOR SYS CHECK 3. press and hold the ...