Questions & Answers for: reset check engine light silverado

...check engine light came on for the reason of a loose gas cap, once you tighten it it will go off on its own. YOU CAN RESET THE LIGHT BY REMOVING THE NEGATIVE BATTERY CABLE OR WITH A SCAN TOOL, IF THE ...

...engine soon how toreset light must have a scanner to reset light but it will come back on until you fix the problem have the system checked to get trouble code that will let you know where to ...

reset the check engine light. It will erase all the bad codes that you have fixed. To do this, you have to remove the positive battery cable for a minute or so and reconnect. It should clear the check

reset check engine light for a 2001 chev silverado with 4.3 Unhook the negative side of the battery for 15 minutes and it will forget the code and relearn all parameters. It'll run and shift a little ...

...reset my engine oil light on my 2000 chevy silverado pick up, now power locks,mirrors,seats dont work. I checked my fuses and there ok. please help have any ideas? try to reset it again . might be ...

reset the computer on a 2000 Silverado for the following lights showing on dash panel: check engine soon; abs brake light; check engine coolant. Is the engine checked? Coolant and abs? hello! take you

...check engine light comes back on. if you just drive it after reset it stays off but if you cut the engine off and back on and drive for about 4 or 5 miles the light comes back on and is saying the ...

...engine light comes on & I loose reverse untill I reset the comp by disconnecting the battery & reconnecting after a while. Can you help me with this problem. service engine light comes on ??? ...

...reset the check engine light to turn it off. It could be something as simple as that or even an air filter needing to be changed. The dealer can tell you how to reset that light to turn it off. Good ...

...Reset the check engine light 2006 Chevy silverado after replacing 2 of the 02 sensors, regaping the spark plugs and replacing spark plugs and wires? With a code reader usually, but you can try these ...