engine light on my acura 3.2 tl. The tcs lt is not on when I start the car, I have to press the button to turn it on. This starting happening rt after I had an inspection service performed. What could
...Engine light by either disconnecting the battery or by using a code reader to clear the codes. However, if the problem still exists it will come right back on. Instead you should get the code read, ...
reset check engine light on Acura TL 1999 i dont know how else to do it other than with a diagnostic tester. i think that may be the only way. Unplug the negative of your battery for about 10 min Then
...Tl 3.2 What does this mean? this codes no much problem,maybe a momentany fuel cap unclosed, to reset disconnect the negative battery terminal few minutes , then reconnect and start engine,good ...
...engine light, Now no radio, it is asking for a code. My vin# is 19UUA5642XA013165 ,I think the serial number is BB0929937....PLEASE HELP .. the silence is Driving me CRAZY..LOL in this situation you ...
...reset that and now engine maintenance light is on but no longer check engine light. does it cut out while driving?? If it cuts out while driving does the speedometer drop to zero even if the car is ...
reset engine warning light how do I reset engine warning light on a 1999 acura 3.2 tl To reset the Engine Light, you'll need a OBD II scanner. It cost about $100. Or, you can go to you local ...
...reset the MIL (engine light). You may have a problem with your traction system, which is often tied into the ABS, as they share use of the wheel speed sensors. The problem should be reveiled with the ...
...reset check engine light... Disconnect the ground (black wire) from the battery. Wait for at least a minute for the computer to reset, then reconnect the ground. Start your car, and the light should ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions