Questions & Answers for: Jeep Grand Cherokee reset engine light jeep

...Checker, Autozone...or similar. Ask them to reset the check engine light and read the error code. There is no charge and its often something small. Spark plug misfire, fuel filter, PVC valve, or

...engine light now out. Problem is that it now will not shift automatically into drive. I have disconnected the battery to try to reset codes. Any suggestions? Thanks! Check your transmission control ...

...reset the check engine light? I had the system tested at Autozone, and replaced the O2 sensor, but now need to turn the check engine light... you have to use an OBD2 scanner to erase the check engine ...

How to reset the engine light code on 2006 Jeep Grand Cherokee? Needs to be done with a scaner . Autozone has this and they can reset it for free.

reset check engine light 93 jeep The easiest way to do this is take the negative battery terminal and leave it off for a few hours. Or if you have an autozone close they can reset it for you for free.

link come on again, and your code 31 - Fault EGR... first need to solve it to deleted. The next links could be interesting: - Jeep read_check_engine_codes - Jeep yourself_ecu_reset_procedure Good luck

...reset ECM (Engine Control Module) button ; a soft reset could be disconnecting negative battery cable few minutes. If your "check engine" light come on again, some OBD fault code is stored there and ...

2005 jeep GC wont shift out sometimes unless u rev engine high or u turn it off and it resets Any chance you have a check engine light on ?If so I would have the computer scanned for trouble codes.

...on your ac the fan should come on. if it doesnt the fans bad. you can reset the engine light by removing the neg terminal on the battery for 10 mins. you can test the fan by putting 12 volts to

...clear you start the jeep and it will run for about 10 minutes then die, is that correct.when this happens is there check engine light come on on dash.dose it sputter or just like someone shut key