Questions & Answers for: Lexmark reset the photoconductor alarm

...reset only when a brand-new photoconductor kit is installed. Resetting the page count without replacing the photoconductor kit could cause the photoconductor to operate beyond its intended life and ...

...reset the photoconductor page count: Turn off the printer. While the printer is off, press and hold the Select () and Return () buttons on the operator panel. While keeping both buttons held down, ...

...reset a new photoconductor in lexmark e450dn. According to Lexmark E450DN service manual; 1. Turn off the printer. 2. Press and hold Checkmark and Right Arrow buttons. 3. Turn on the printer. 4. ...

reset. To confirm that the photoconductor page count has been reset, it is recommended that you print a menu settings page and check the photoconductor level. Do the following: With the printer at the

...whenever you replace the photoconductor unit. Here's an article in the Lexmark website on how to reset the photoconductor page count. Just click on this link: http://bit.ly/9WAvUK. Hope this

...Reset the Photoconductor Page Count on a Lexmark E340 or E342. Click on this link http://bit.ly/b1Qil7. Thank you for choosing Lexmark. NOTE: Resetting photoconductor page count should be done only ...

...reset the PC counter, Instructions on how to replace photoconductor unit available at http://bit.ly/aykTXL Instructions on how to reset photoconductor counter available at http://bit.ly/9WAvUK ...

...reset only when a brand-new photoconductor kit is installed. Resetting the page count without replacing the photoconductor kit could cause the photoconductor to operate beyond its intended life and ...

...Alarm setting is set to Single or Continuous (default is Off), the printer automatically notifies you before the photoconductor reaches this point and displays the message 84 PC Unit Life Warning. To ...

reset photoconductor Replace the photoconductor: 1. Turn the printer off, and replace the photoconductor unit. 2. Reset the page count. • Press and hold Select and Return while turning the printer on.