Questions & Answers for: Lexmark reset the photoconductor alarm

Question about E238 Laser Printer

3 Answers

...reset only when a brand-new photoconductor kit is installed. Resetting the page count without replacing the photoconductor kit could cause the photoconductor to operate beyond its intended life and ...

Ad

...reset the photoconductor page count: Turn off the printer. While the printer is off, press and hold the Select () and Return () buttons on the operator panel. While keeping both buttons held down, ...

Ad

Question about E232 Laser Printer

1 Answer

...reset the photoconductor counter on a model without the LCD display? Thanks in advance! Instructions for resetting photoconductor count on Lexmark E250 ...

reset. To confirm that the photoconductor page count has been reset, it is recommended that you print a menu settings page and check the photoconductor level. Do the following: With the printer at the

Question about E120n Laser Printer

2 Answers

...reset the photoconductor counter ? There's no chip on the photoconductor, so you need to reset this manually Photoconductor Reset Procedures: Step 1: Open the front door and hold the Cancel button ...

Question about Lemark E352DN Laser Printer

1 Answer

...whenever you replace the photoconductor unit. Here's an article in the Lexmark website on how to reset the photoconductor page count. Just click on this link: http://bit.ly/9WAvUK. Hope this

...Reset the Photoconductor Page Count on a Lexmark E340 or E342. Click on this link http://bit.ly/b1Qil7. Thank you for choosing Lexmark. NOTE: Resetting photoconductor page count should be done only ...

Question about Lemark E352DN Laser Printer

1 Answer

...reset the PC counter, Instructions on how to replace photoconductor unit available at http://bit.ly/aykTXL Instructions on how to reset photoconductor counter available at http://bit.ly/9WAvUK ...

Question about E332n Laser Printer

1 Answer

...reset only when a brand-new photoconductor kit is installed. Resetting the page count without replacing the photoconductor kit could cause the photoconductor to operate beyond its intended life and ...

Question about E342n Laser Printer

1 Answer

reset photoconductor Replace the photoconductor: 1. Turn the printer off, and replace the photoconductor unit. 2. Reset the page count. • Press and hold Select and Return while turning the printer on.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...