Questions & Answers for: Radio Shack reseting entry code

Radio Shack Pro-2043 scanner had a friend give me a radio shack PRO-2043 30 channel direct entry programmable scanner. No owners manual with it and I know nothing to very little about them. how might ...

.....UNDISTURBED for an hour or two. Also make sure you have the correct Code Entry Instructions for your radio. Find your instructions on this free website ...

How do i check my messages from another an outside location because the code I was given no longer works The code has been changed. You will need to reset the code from the machine.

Radio Shack Pro-94 A radio guy I know programmed 3 freqencies into my PRO-94 and now I can't load anything? No telling what he did, but if you've tried deleting his entries and the scanner is still ...

...Code Entry Instructions Once the unit has been turned on the display will show ' CODE - - - -' Press preset [ 1 ] repeatedly for the first digit Press preset [ 2 ] repeatedly for the second digit ...

my pro 94 scanner shows the code luired when turned on. How do I fix this? I'm guessing that the display shows "wired" and not "luired." This mode, along with the code, is supposed to clear when the ...

I have a Radio Shack digital answering machine 43-3808A. It is supposed to allow me to check message remotely but I cannot get it to work. I noticed another message at this website saying the same ...

...code entry, the red indicator turns off. For an invalid code, the red indicator flashes. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If ...

...code search mehod, if you do not have its codes for direct entry.Visit this site for more details.  Type in the site name “Electro-help” either to Google or Yahoo search box [not in the address ...

help to unlock Radio Shack Pro-70 Scanner found it in the closet, hooked up power source and turned on. screen says channel 1 - alll zeros on frequency - scan- and L/O will not respond to any key . I ...