Questions & Answers for: returns Cars & Trucks

fuel pressure regulator How does one know if fuel pressure regulator is bad?Have a 1995 dodge carvan fuel not returning to tank through return line.Line is not blocked. Have you checked the fuel ...

Return to idle When driving the engine revs do not return to idle when the accelerator peddle is released. The revs stay at around 1200 rpm for about 10 seconds and then return to idle. When starting ...

Clutch sticking on 2000 pontiac firebird trans am. clutch comes halfway up but need to pull it up the rest of the way w/my foot. There is actually a fix for this problem. There is no return spring for

Does my 1974 dodge dart with a 318 motor have a fuel return line on it fuel sending unit? I need to replace the fuel sending unit on my 1974 dodge dart. It has a 318 motor. I have been shopping around

is there a diagram of where the clutch return spring is on a 2008 Hyundia Santa Fe? I would add fluid to my clutch if I had a picture of where it goes or a diagram of where the clutch return spring is

Ignition is not returning to its run position after starting motor Can manually return key to right position. If you don't there is no Sequential, power windows or windscreen wipers Just replace the ...

return an item when the seller does not accept returns i havent tried to return it yet. But seller states he accepts no returns Was this an E-Bay or Amazon purchase. Is this an electronic item per ...

Where is my clutch pedal return spring located at and where do its attach to???? 2006 volvi? s40 2.4l It shouldn't use a spring to return the pedal, it uses hydraulic pressure to return the pedal to ...

want to return a par of shoes that didn't fit. how do I do it? Contact vendor for RMA and return protocol. Put them back in original box and use the return slip that came with the shoes. You can also ...

Caterpillar 3412 Return Lines. I have a old water pump with a 3412 CAT engine, the fuel injector doesn't have return lines, can someone please confirm if the return fuel goes inside the cylinder heads