...they can fall out. Next u will find a snap ring on the shaft, remove it and remove bearing assembly.reverse the steps and put back togather. I hope this ...
button while in reverse, the engine still cuts out. I thought the reverse override button was supposed to prevent this. Check all the connection on the override circuit. If you ride in muddy and sandy
raptor 660 won't start well one day my son hit the start button and let of real quick then the lights on the dash went out. So I went and replaced the starter relay that wasn't it. The bike would pop ...
...and it was doing the same thing and that fixed it. clean jets in carb. i have an 03 660 and the reverse over ride was the problem and it did the exact ...
setting the onboard clock? i have owners manual but its not in english so i dont understand it how do i go about setting the time Turn main switch on (key). Push both buttons on the dashboard until ...
raptor reverse i have a raptor 660cc and i put it in reverse and most of the time it stalls out. what can be done to correct this?? try loosening the clutch a little. It may be adjusted tooo tight.
660 raptor wont start i bought a new battery the head lights turn on but the bike doesnt even attempt to kick over. Could this be the starter? If when you hit the button you here a solid knock ...
button on a 2004 yamaha 660 grizzly if your talking about the reverse override or the speed limiter,you will have to install an aftermarket high performance CDI unit Can anyone tell me where I can buy
my 2006 yamaha grizzly 660 wont turnover enough to start. it started out i thought the starter was goin bad because when i hit the button to start it, it would just click. but if i kept tryin it would
Question about 2005 XT 660 R
2004 Yamaha kodiak 450 atv. Diff. Lock light is on and won't go off. Won't go faster than 30 Km. an hour any solution. Kids were playing with buttons while machine was off. When I went to ...
Usually answered in minutes!
60 Questions
12 Questions
9 Questions
8 Questions