...right side of the needle clamp. 2 - The old needle wil probably fall out, if not you can simply pull it straight down to remove it. 3 - Slide a new needle up into the needle clamp. 4 - Tighten the ...
...right hand side of the tension and go round it making sure the thread goes between the discs, up the left hand side to the takeup lever, thread the takeup lever right to left, take the thread all the ...
Question about Designer I
...right side but it looks normal on the wrong side. This is true for many decorative stitches too. On embroidery this happens too and often the reverse side looks better than the right side. Take the ...
...right-hand-side of the needle plate firmly and the front left side should pop up. You can then lift the plate out to clean underneath etc. When replacing, put the hole in the plate over the locating ...
Question about Artista 180
right side of buttonhole or skips stitches right side of buttonhole either won't stitch at all or skips most stitches. left side stitches perfectly SKIPPED STITCHES1.the needle is not inserted
...right side. I've found myself reverse sewing over the right side to make them look close. But this is not right, what could be causing the problem? I've tried changing settings but did not help. You ...
Question about 7422
right side of the stitch. Nothing is catching on the left side at all. The zigzag is only giving me a straight stitch and the decorative stitches only stitch the right side of the pattern. 1st off try
Question about 7422
...Put the front & back pieces together with the rights sides facing each other. Stitch the shoulder seams, then stitch the side seams. What Does Right Side Wrong Side Mean Right Sides Together
Question about 7422
...right side in an all knitted item and if so should you start a new color on the wrong or right side. It really depends on the pattern that you are knitting. If you are doing straight knit one row and ...
Question about 7422
...the flat side of the needle faces the "right side" of the machine. Perhaps the manual would be helpful (pg 8 indicates the flat side should face to the right): Kenmore 117 552 Instructions ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions