Questions & Answers for: sc 326 Office Equipment & Supplies

SC 326: Laser synchronization detector board cannot receive the laser beam. Replace the laser sync detector, Part No. A2935310. Or try the following solution; Open the front cover and remove the brown

...SC 326 is -- 2nd laser synchronization error. Meaning, the 2nd laser synchronization signal cannot be detected by the main scan synchronization detector board even if the laser diodes are activated. ...

sc 322, sc 326 codes Hi, Please any one help me for the repeated codes sc 322 and sc 326.Am having this problem on more than 5 machines of Ricoh 1035/45 . I have tried cleaning LD diode ,sync sensor. ...

sc 326 when i make counter its ok no sc code and by scaner make copy its give code sc 326 i change 2nd laser synchronization its same plz send me detail what i should do thanks LD unit, or BICU board.

...sc 326 in dsm 635 error sc 326 in dsm 635 First of all check that the laser **** glass is still there, I've seen a couple of machines where the **** glass has been missing completely and it's ...

...sc 326 and 329 is the laser error. please replace whole laser unit to solve the problem. check the door switches as well. if any door switch is faulty, it will still show laser error code. i have ...

...SC 322 or 326 depending upon timing. 5vdc not being fully applied to connector 403 pin 3 on the Laser Diode PCB causing an Open Cover Indication, or 24vdc not being applied fully to connector 107 pin ...

Ricoh Aficio 2045 error SC 326 cause of sc 326?

...sc 326 aficio ap610n go to the following sites and post the statement like this: ricoh ad 610 error message sc 326 aficio ap610n at the following sites.: ...

...sc 326, i need a solution without changing laser unit thnx? in the same laser unit do the service to the laser lences more so the second syncronizing lens then gv me feedback THIS VIDEO SHOW HOW FIX ...