Question about S410 Heart Rate Monitor
sensor. The magnet must be facing the speed sensor. Or Attach the screw magnet to a spoke at the same level as the sensor. The magnet must be facing the speed sensor. Fine-tune the positioning of both
Question about T20 Folding Programmable Treadmill
magnet is in front of the sensor, open or 1 when the magnet is moved away. If the sensor is good, within range of the magnet (reading the magnet with a continuity test is a good indicator of placement
...sensor magnet in LG 6.5 kg washing machine? Recently I got a dE error and when technicians attended, they said, there was problem to closing door lid. To resolve this, technician replaced sensor ...
...sensor magnet in LG 6.5 kg washing machine? Recently I got a dE error and when technicians attended, they said, there was problem to closing door lid. To resolve this, technician replaced sensor ...
with my JEEP Liberty 2004 is p0335 Diagnostic Trouble Code (DTC) P0335 Magnetic Crankshaft Position Sensor Electrical Error In this circuit DTC (data trouble code) sets when a) The magnetic crankshaft
...if necessary. You may also check the spacing of the speed sensor to the magnet. The spacing should be 1/8" to 1/4". Adjust if necessary. My Precor Elliptical Shuts Down After 7 Seconds what is ...
Question about 2005 Explorer
...WILL ANY STRONG MAGNET DO Yes ant Magnet will set the sensor to Neutral, and will function normally,Just Pass the Magnet over the Post of the sensor DO NOT HOLD it on the sensor,Have A better ...
...sensor uses two magnetic pickups between a permanent magnet. As an element such as a reluctor wheel passes the magnets the resulting change in the magnetic field is used by the sensor electronics to ...
sensor and the black magnet does activate the sensor. My question is: Will the black magnet be too strong of a magnetic force for the wired low voltage wired sensor? Does it matter what type of magnet
sensor and the black magnet does activate the sensor. My question is: Will the black magnet be too strong of a magnetic force for the wired low voltage wired sensor? Does it matter what type of magnet
Usually answered in minutes!
346 Questions
191 Questions
188 Questions
214 Questions
122 Questions