Questions & Answers for: Honda separation rubber

91 accord lft brake stays on, right no work and no brake lgts wrk All of the sudden i walked behind my car and the left brake light was staying on! the right side quit working and i cannot get the ...

smoke coming out the exhaust when giving gas I just change the oil and spark plug, The dirt bike doing smoke when giving gas, I wondering why? Assuming you have the correct amount of oil in the ...

02 accord EX 4dr. Power window on drivers side will not go down (better than the other way around, huh?). All other windows work. How do I tell if it is the switch or the motor? I have removed and ...

Remove just the front hub? Is it possible to remove the front hub without dismantling the steering, ball joints etc? I have it all taken apart but I don't want to break anything. 96 Honda Civic EX ...

Howw to replace a termnostat on 1997 Honda Crv follow big rad hose at top of rad to engine.will be small cover bolts or screws,remove may have rubber oring or gasket be sure it is cool aluminum will ...

can you tighten a harmonic balancer on a 96 passport if it id wobbling No, it is made up in two pieces, separated by a rubber.

I have a 2004 Honda VTX 1300C. As I was riding today I noticed the left front turn singnal was loose. I tried to located the problem but could not. I took off the front light bar (stock bar) and all ...

98 civic hatchback, clutch goes to floor and stays there. The clutch and brake system share a resevior for fluid. Fluid levels are good. Is there a cylinder for the clutch like the brake cylinder? Is ...

my stearing while shakes when i drive its the ___bracket Check for tyre problems ---tread separation--belt separation.Check balance as one may have fell off Check wheel alignment Check for loose/worn ...

How do I reattach a rear turn signal? The rubber collar separated from the metal stud mounted on the fender. I bumped one of my rear turn signals and it separated at the rubber collar. Mounted on the ...