Questions & Answers for: HP LaserJet separation rubber

Question about LaserJet 3200 All-In-One Printer

1 Answer

rubber from both separation pads the old inside the printer and the new one you just got,put the new rubber sep pad in the printer and put the paper feed roller back.....printer will work as new again

Ad

Question about LaserJet 4100 Printer

1 Answer

...rubber up and shorten the life span drastically. The separation pad should be right at the front of the paper tray, clean that also. If your printer keeps jamming after that, you may have some more ...

Ad

by roughing up the rubber on the pickup roller and the cork on the separation pad by scuffing both with a light grade of sandpaper, just to give it some tooth. But replacing them is best, it'll fix it

Question about LaserJet 1100 Printer

1 Answer

...rubber pads, these separate the pages. You will need to clean these with mild detergent, but do not use alcohol. If this helps for a little while or not at all the separation pads will need to be ...

Question about LaserJet 3050 All-In-One Printer

1 Answer

...separation pad. Lift up the ADF cover. Lift up the ADF roller assembly. There is a small rectangle rubber pad that should be staring up at you. Clean it gently with a lint free cloth and a little ...

Question about LaserJet 3050 All-In-One Printer

2 Answers

...separation pad. This small rubber pad prevents the roller from picking up more than 1 page at a time. When it gets worn down the pages can slip by and you get the multi-sheet feed like you have. The ...

Question about LaserJet 3015 All-In-One Printer

1 Answer

...separation pad. This is a small rubber pad in the document feeder that the pickup roller presses against when it feeds paper. When the pad gets worn down it allows multiple pages to feed at one time ...

Question about LaserJet 3050 All-In-One Printer

1 Answer

separation pad' needs to be cleaned or replaced. It's a small rectangle piece of rubber at the entrance to the automatic document feeder(ADF). It should be just under the feed roller.A drop of

...separation pad is easy to replace. These parts come in a kit caller RK-1320 the parts kit is available here: http://www.ccl-la.com/catalog/product_info.php?products_id=71 tray check , pickup roller ...

Question about LaserJet M3027 MFP Printer

1 Answer

separation pad. Since the problem started after the maintenance, it may nt be in properly. As you are getting the rubber on the paper, the roller is turning, but the paper is not going anywhere giving

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...