Questions & Answers for: Mazda 626 serpentine belt

...serpentine belt there is a tensioner that keeps tension on the belt. Most tensioners have a area where a 1/2" ratchet or breaker-bar can be inserted to release the tension. The tensioner is nothing ...

...belt, and another say serpentine. I chose the latter to be fix b/c it was cheaper. Now the sound is softer, but still there. Could this be that the belt that ran/turned the part failed for so long ...

...serpentine belt? The speedometer doesn't work. Well to replace the serpentine belt, you need to get a new belt first of all. Then either a diagram from a book or one you draw of how the old one is on ...

...a serpentine belt? or better yet, what is the best way to relieve tention to install this belt? use a 3/8" ratchet to lessen the tension A square hole is machined into the tensioner for the ...

serpentine belt is a little worn im wondering if its the belt and alternator i had my battery checked and its good . i just bought this car and in may 2010 the owner told me they put a used alternator

...serpentine belt it's tight, if it's a V-type belt, pull on the cooling fins of the alternator to see if it will spin, if it does the belt is loose. If you have a multimeter, check the voltage at the ...

belt as a serpentine belt on a Mazda 626 year 2001? Yes if you only have one belt and that is a serpentine belt then that is your drive belt. Normally a drive belt does not refer to a serpentine belt,

...serpentine belt tensioner , not such a big deal as long as you don't over heat the engine due to no water pump. If you are talking about the timing belt tensioner , it could be big trouble. I am not ...

...belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models? Click the link below: ---- ...

...serpentine belt is slipping or gone. Not sure if the water pump runs off the same belt as the alternator on this model. Your alternator belt broken and by bean broken doesnt turn the water pump that ...