Questions & Answers for: Oldsmobile Cutlass Supreme serpentine belt

...serpentine belt? it requires either a long wrench or a socket or just a ratchet, look at the tension-er to determine that, then just move the tension-er in the opposite direction of belt tension to ...

Ad

Question about 1993 Cutlass Supreme

1 Answer

...serpentine belt on a 93 cutlass supreme 3.1L. You gotta move the idler pully with a wrench and the belt will loosen enough to come off. The trick is that you have to have one hand on the wrench ...

Ad

...serpentine belt on a 1995 olds royale 3.8 . My friend said that the engine mount needs to be removed in the process.I never heard of this b 4. Is this true? yes on some gms the motor mount has to be ...

Question about 1997 Cutlass Supreme

2 Answers

...serpentine belt how much am i looking at to fix? Depending on where you purchase the serpentine belt, and whether it's a budget or lifetime version, prices range from $18 to $33. You can replace this ...

how to replace serpentine belt diagram 1997 olds cutlass serpentine belt diagram 1997 olds cutlass Have you checked under the hood, should be a belt diagram some were around the fan shroud .

Question about 1997 Cutlass Supreme

1 Answer

...serpentine belt passes over the crankshaft pulley. Remove the belt and the harmonic balancer--the sensor is located just behind the balancer. It requires an alignment tool to place the sensor in ...

Question about 1995 Cutlass Supreme

1 Answer

serpentine belt, I was told to release a tension bolt? Also to draw a diagram of how the belt wraps around the pulleys? is there any tension involved or timing involved. There is a tensioner pulley in

Question about 1994 Cutlass Supreme

2 Answers

...serpentine on There is an idler pulley with tension on it. You need to release tension to take belt off alternator pulley. Use a socket and ratchet and hold tension off while removing belt from ...

Question about 1994 Cutlass Supreme

1 Answer

...serpentine belt. What do I do? 2.8L and 3.1L Air Pump Belt Disconnect the negative battery cable. Loosen the air pump. Remove the worn belt. To install: Adjust the belt to specifications and tighten ...

Question about 1994 Cutlass Supreme

1 Answer

...serpentine belt Label and detach the electrical connector(s) from the back of the alternator. Fig. 5: After removing the serpentine belt, detach the electrical connector from the rear of the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...