Questions & Answers for: set aperture priority mode

...aperture and camera chooses correct shutter speed to get a good exposure Apparently there is no Shutter Priority mode (user cannot set only the shutter er speed and allow the camera to set the ...

...aperture priority is but I do not understand its limitation to manual mode. The 3000z has three settings that you can operate the camera under: 1) full automatic; 2) Program mode; 3) manual mode. ...

Aperture priority not working...HELP!! Hi, I have a Nikon F100 with an MB-15 grip/battery pack and a nikkor 70-200mm AF non d/g type lens also a nikkor 28-100mmG AF and a sigma 28-70mmD AF macro lens ...

aperture selection is either set automatically by the camera body (if in shutter priority or auto/program modes) or is done using the camera body controls when in aperture priority or manual modes. If

...combinations the same way in Program mode. You can indirectly control the shutter speed in Aperture Priority AE by changing the aperture and letting the camera set the appropriate shutter

...set the aperture to its smallest setting (largest f/number) and lock it. If you're using a lens without an aperture ring then it's a bit harder. You can only use the camera in Shutter priority or one ...

...aperture priority, your camera will give you control over white balance. Switch to aperture priority, then check your white-balance (wb) mode. You should still be able to select "auto" within these ...

set to in aperture priority? Do some lenses not support the apertures that the camera lets you set? Does it affect the speeds that can be set in aperture priority. Sometimes when I try to duplicate an

...set tne aperture on my camera--sanyo-vpc-e2100 I need to know how to increase the dept of field on my camera. How can I find the aperture and set it on my camera Take a look at this.You can set the ...

...Aperture priority setting doesn't change depth of field Getting same depth of field results with f3.5 to f16. Tried several f stops It is possible that there are other factors affecting the depth of ...