Questions & Answers for: how to set height

...in the instruction above. The knob only set the stop of the deck lever. Once set the deck lever lifts the deck up and holds it but when you let that lever down it returns to its mowing set

height adjustment are "stops" rather than being attached to an axel. Look for something that rould resemble a set of circular steps somewhere in the path the axel would take as it goes up and down. It

...set up the height to be .375 it goes to .37 are these labels just not compatible? As long as your printer front panel setup is set to AT LEAST your label height, you should be fine. You set up your ...

...height is factory set at 35 PSI . If supply pressure varies greatly from this, remove the (bottom cover plate) and adjust the screw on the regulator Clockwise adjustment will raise stream height and ...

...set the guide wheel heights on the mower deck and the blade height for proper mowing heights. with a marker,mark on the front of the deck where the blade height is, and do the same on the back, do ...

won't cut on low height setting blades run fine on high setting, but when lowered to lower height settings blades (deck) loses belt drive power and cease to cut unless you raise height setting. ...

...height is currently set.  Read more: How do I Adjust the Height on a Great States Reel Mower? | eHow.com http://www.ehow.com/how_6834215_do-great-states-reel-mower_.html#ixzz21NOr1e8d3Rotate the ...

it 6 years ago the deck height worked great. What I mean is we would always cut the grass on the #3 setting for the deck height but last summer I noticed that #3 setting was cutting the grass to short

set an old Elgin watch?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> What is an Elgin watch worth?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;

...height set on the wrong side of the slide. So like one the engine side the carb side is higher than the Airbox side. To you set carb slide height on the Airbox side or engine side of the carburetor ...