...START/STOP. If we ever had instructions on how to set this thing, they are now lost. Can you help? I too lost the instructions for my generic 4 button digital watch and had to find the functions by ...
set mode - press lap/reset twice until the hours start to blink. press start/stop and cycle thru all the modes depending what time you want to set - it will go thru 1, 2, 3, etc thru 24 H then 1, 2, 3
...LIGHT button is the set button also, just press it for 15 seconds if dial flashes, then go to MODE button and choose what going to set, the START/STOP -- LAP/RESET is the scroll button you going up ...
...light use battery faster than when not used), you set it by pushing mode button twice, as indicated above, then go to hour or minute setting by pushing the lap/reset button, and advance to the time ...
Question about Armitron Sport Link Bracelet Watch
...SET when done. G. Press START/STOP to turn alarm on or off. H. Press SPLIT/RESET to turn chime on or off. When alarm time is reached, watch will beep for 20 seconds, or until any button is pushed. ...
Question about Ironman 30 Lap 53952 Wrist Watch
...Set/Recall" button. To start the timer, press the "Start/Split" button. It will continue to run even if you exit to another mode. Pressing the "Stop/Reset" button will stop the chronograph. To record ...
Question about Ironman 30 Lap 53952 Wrist Watch
...set this digital watch,----4 buttons, 1=light, this should be just for the light built into the watch, 2=MODE this is the button you press to set the functions, press this button and see everything ...
set the minutes, using the "Start/Stop" button to advance to the correct minute. Repeat the procedure to set the seconds, month, date and day of the week on your Aquatech watch. Setting an AlarmTo set
...watch Press the MODE button. Then hold and press reset/lap button for 2 seconds. Press mode button again.Press Start/Stop to set the Hour.Press mode button again. Press Start/Stop to set the
Question about 1440 Nylon watch
SET/LIGHT button (upper left) until "light on" or "light off" is displayed 2. press the MODE button (lower left) until "hour" is displayed and the hour digits are flashing 3. use the START/STOP (upper
Usually answered in minutes!
756 Questions
260 Questions
271 Questions
253 Questions
254 Questions