sharp AR-5316 error code is showing (d) I have a copier Machine Sharp AR-5127, the error is F2-02, is there any code to correct this? content: heat roller abnormally low temperature. reset: press # --
ERROR CODE 4H ON AR-5316 When copier is switched on error code 4H appears and copier cannot be operated. Solution required urgently please. There is a problem with the fuser unit ( exit where it gets ...
4h display messege 4H how to solve pls Its an error indicating the fuser isn't at the right temperature. It could be a thermistor that went out. It should be looked at to see what needs to be replaced
error h4 WHEN THE SHARP AR-5320 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IT IS VERY URGENT. it is on you fusing unit of your copier, check the fuse maybe
Question about AR-5316 Advanced Digital Imager Copier
...3, turn power off and back on . ERROR CODE 4H IN DIGITAL SHARP PHOTOCOPY AR-5316E press:# --> interrupt --> clear --> interuptreset : 14 --> start Heat roller abnormally low ...
Question about AR-5316 Advanced Digital Imager Copier
...sharp copier AR-5316 has the problem. Error code 4H appear and cannot copy. Hello sir; You need to do a reset procedure as follow; Press "#", "interupt", "C", " interupt". then enter 14 press start, ...
There is an error code that is not referenced in the manual: flashing 4H. Copier will not operate and is the same after power cycling. 4H means you have a bad fuser unit.
i have 4H Error in my SHARP AR-5516N.Please give the solution iput code (# interrupt C interrupt) led turns off .input 14 press copy
...Sharp AF5516 if error message is 4H than press #,intercept,c,intercept and enter 14 digit and finally press start button. This will solve h4 problem i have problem with copier make sharp model 5516. ...
4h error on sharp AR 5520 how to clear 4h error Check fuser unit firrst
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions