Questions & Answers for: single cam timing marks 2

...timing marks. NOTE When aligning the cam pulleys with the seal plate marks, align the left cam pulley ?I? mark and the right cam pulley on the ?E? mark. WARNING When aligning the timing marks, do not ...

...timing markes are (right cam E)( left cam I) at that point the loobs on # I cyl. Int & Ext open all four valves at the same time both cams should have the marks point to 12 o clock and the crank ...

Where is the timing mark on the crank pulley on a 1995 Kia Sportage Twin Cam 2 Liter buy manual, clean pulley, run finger nail on pulley you can feel it, it will feel like a deep notch

...Single overhead cam engone. Both are Similar. Both have a notch on back side of crank pully that aligns with a tab on engine just above crank pully looks like a triangle with the tip near crank pully ...

we have a 96 sportage with a blown moter and found a 2001 with a good moter do they enter change the first generation kias 1994-2002 have the same engines except for the single cams in 94-95

...timing marks to use on a 1996 kia sportage. there is a mark on the plate @ 12:00 on the I and E side I found the top dead center mark on the crank but each cam pulley has a E, I, and S mark. how do ...

2001 kia sportage timing marks 2.0 motor replaceing broken timing belt there are 2 for the cams, one for crankshaft and one for oil pumpshaft. have illustrations if you need them.

timing marks on 95 kia sportage sohc http://www.2carpros.com/diagrams/kia/sportage/1995

i need the firing order for the cam shaft timing on a 1995 kia sportage 2 ltr dohc Is this all you need or the timing marks too?

...are closed you may have 2 put timing cover and crank pully so u can find the dtc marks then u might be able 2 sort it out on the factory marks it sucks when people have made up their marks good ...