Questions & Answers for: skyjet overcharging rectifier

...my 2006 Polaris 450 Sportsman is overcharging when rpm's are in driving range over 3000rpm voltage goes to 18.5 vdc at idle voltage is normal at 14.3vdc sounds like the regulator/rectifier is ...

Where is fuel tap on skyjet f5 125 Hi i know its a bit lame but is there a fuel tap on skyjet f5 125-23 as i cant find one on mine or is it auto fuel tap or somthing?? There is a fuel Tap on the ...

...skyjet 125-23 F5 RR7 needs replaced? rectifier maybe going bad and overcharging. Use a test meter and test voltage at battery without engine running, with engine running, and reving engine up. It ...

skyjet 125 F5 was working fine after i changed the CDI and rectifier.It has now lost all spark it still turns over with Ignition etc just no spark at all. could this be the coil? if you have any ideas

...overcharging the battery. Already changed the rectifier which had a burnt plug. also changed the stator. still pushing 17-18 volts to the battery. any solutions? rectifier (voltage regulator) is ...

...rectifier doesn't function anymore Suzuki recalled the regulator/rectifiers in 2011. Check with your dealer, however get a voltmeter installed at the same time as the replacement caused $3,000.00 ...

...overcharging rectifier regulator /or alternator ...start engine ..put meter on wire coming from alternator if over 14.0 volts its shot should be 13.5 to 13.9 if thats ok rectifier regulator is ...

Skyjet 125-23 F5 fuel line routing I have a Skyjet 125-23 F5 which I have recently purchased the fuel tank and lines were already disconnected, I have bought a filter and some fuel lines but have ...

...overcharging what could it be to caves it to overcharged,i am a disable veteran,need help? Sounds like a faulty regulator rectifier on the alternator borrow a compatible alternator to test the ...

Hi were exactly is the indicator relay located on a skyjet 125 motorbike plz help Hi, Daniel for more information about your question and valuable "FREE" downloads that you will need please click on ...