Questions & Answers for: slave cylinder sunfire

Question about 1995 Sunfire

1 Answer

slave cylinder or clutch? or both? I have just bought a 1995 sunfire with a 5 speed, it starts right up and runs great but sometimes the clutch is fine and drives great and sometimes the clutch petal ...

Ad

Question about 2001 Sunfire

1 Answer

slave cylinder the bleed nipple is seezed, does the slave cylinder come apart, i can see C clips, if I pull them off will I be able to take the slave apart, and soak the part with the seezed nipple in

Ad

slave cylinder on a 95 sunfire do i have to pull the tranny? no you dont have to pull the tranny to get to the slave cylinder.it should be located on the drivers side almost under the door or right in

Question about 2003 Sunfire

1 Answer

...slave cylinder, cluth master cylinder. can not keep cluth bleed, what do i do my 1999 pontiac sunfire drivers door latch is broke can not close the door. i have it pulled shut? how much will a used ...

Question about 1996 Sunfire

1 Answer

slave cylinder and master cylinder. The problem is that the pedal hits the floor before releasing the clutch. any ideas? Its either the clutch fluid is wrong or not at the correct levels or it has not

slave cylinder or master cylinder, or a bad slave cylinder. Once you identify the point of leak, I can help you with repair info if needed. It seems like your Slave Cylinder for your clutch has a leak

Question about 2004 Sunfire

1 Answer

...and it comes back and its a 1996 sunfire gt with a 2.4 Does your slave cylinder use the brake master cylinder to help pump fluid into the slave cylinder. You have a bad seal in the slave

...clutch slave cylinder in pontiac sunfire 2003 The slave cylinder is what moves the clutch fork inside the bell housing. It would be mounted just inside or outside of the bell housing at the

slave cylinder inside the transmission I have a pontiac sunfire 2005. I was told the slave cylinder is located inside the transmission..invariably it is a lot of manual work and more labor to be paid.

...slave cylinder located at? wen i press my pedal it stays at the floor.what could that be? Hello Herman, I assume that you are referring to the clutch slave cylinder. Did you check the fluid in the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...