Questions & Answers for: slide on the carb

...slide on that carb just barely starts to move also. Now recheck the slide movement timing. Do this process until the slides on both carbs begin to raise at the EXACT same moment. Lock down the loose ...

Ad

Question about 1999 VN 800 Vulcan Classic

1 Answer

...slide on that carb just barely starts to move also. Now recheck the slide movement timing. Do this process until the slides on both carbs begin to raise at the EXACT same moment. Lock down the loose ...

Ad

Question about 1999 VN 800 Vulcan Classic

1 Answer

...slide on that CARB just barely starts to move also. Now recheck the slide movement timing. Do this process until the slides on both CARBS begin to raise at the EXACT same moment. Lock down the loose ...

...carb the slide should drop right to the bottom of the housing,you can check this by looking through the rear of the carb and you should be able to see the bottom of the throttle slide,if the slide is ...

...carb directly connected to the slide just adjust each cable accordingly and achieve the same as above. make sure you have a little freeplay at the throttle when you are done. you can adjust that by ...

Question about 2000 GSX 600 F (Katana)

1 Answer

...carb end is in holder , Cable is not kinked, Cable at handlebar end is properly in slide, Pistons in carbs are free to slide There are no obstructions in carbs. Try, Disconnecting cables from carbs ( ...

Question about 1989 GSX 1100 FJ (Katana)

1 Answer

#1,2 carbs slides won't raise when throttlr is #1,2 carbs slides won't raise when throttlr is opened tighten the scews that lift the slides . need to remove carbs to access these .

Question about 1989 GSX 1100 FJ (Katana)

1 Answer

i cleaned my carbs now i have a huge power loss cleaned out the carbs put everything back together and when i went for a test drive it was real sluggish and i wasn't getting good throttle response

Question about 2000 FLSTC Heritage Softail Classic

1 Answer

...slide and the carb mouth. I would really like to run this carb. Just doesn't make any sense. Should just come out once everything was taken off. Sounds like you still have some kind of fastener in ...

Question about 2000 FLSTC Heritage Softail Classic

0 Answer

...that you will need please visit the websites below. Good luck and have a nice day. Help with Carb Problem pod filters Drilling Carb Slide kawasaki vulcan 750 carb cleaning easy way Taking apart my ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66827 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...