Questions & Answers for: Oldsmobile Bravada solenoid

shift solenoid relay.. internal or external? my car does not shift into the final gear, I had the codes checked and it said I needed a shift solenoid relay switch, I just need to know if it is located

Ad

I have a open or shorted condition on the shift solenoid circuit I have a 97' bravada and I took it to auto zone and they said it was a solenoid circuit and did not know what I need to do to fix the ...

Ad

Question about 1998 Bravada

1 Answer

wont start when cold Does the engine crank? fuel delivery Engine does not crank, solenoid clicks? Poor electrical connection, weak battery. No engine crank, no solenoid, nothing? Battery, electrical ...

...up right well there are usually only three wires or less most generally two power and one for the solenoid. for that there should be the power which is the big one and a smaller one for the

...likely to be either the neutral safety or clutch safety switch. But it could also be the starter solenoid or entire starter. The way to tell is with a test light attached to the starter solenoid ...

Question about 1997 Bravada

2 Answers

...to know what the problem is to check. But the problem is definitely from either the battery, the solenoid or the starter. Since you are hearing the clicking sound, it simply means voltage is ...

...it in first ( drive) and it doesn't move , that indicates that the torque converter clutch servo/solenoid is not working ( wiring , connections , TCM or solenoid with no 4th or OD it is the servo/ ...

Question about 1999 Bravada

1 Answer

transmission had all new module put in tranny with all new solenoids and everything was fine until now when you first start it. it starts out in 2nd and only would shift from 2nd to 3rd no first or ...

Question about 1999 Bravada

1 Answer

...no crank at all. Any suggestions to narrow down the problem would be greatly appreciated. So no solenoid click or anything? IF the solenoid at least clicks but the starter don't spin then it

...hose is the camshaft position sensor (CMP)
If your looking for the camshaft positioning actuator solenoid its location is on the exhaust manifold side on the top right corner of the cylinder head, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...