Questions & Answers for: Chrysler 300M solenoid valve

valve body assembly. Still going into "Limp-mode". No refunds from these shops and only more headaches. 2002 has a known solenoid problem. The solenoid pack must be a new type. They have dates printed

solenoid switch valve is latched in low/reverse position..solenoid switch valve is located in valve body of transmission,but for 2001-2004 LH vehicles you need transmission event data read to find out

...SOLENOID SWITCH VALVE LATCHED IN THE LOW/REVERSE POSITION..YOU NEED TO HAVE SCANNED AGAIN AND HAVE "EVENT DATA" READ.. LOOKING FOR TRS CODE..IF IT READS TR2,YOU NED TO HAVE TRANS SHIFT CABLE ...

...is the vapor canister purge valve/solenoid located On the drivers side under the hood toward the back not to far from the the strut housing.If you have the new one try to match it up by the looks

...VALVE BODY AND SOLENOID PACK IN TRANSMISSION WHEN CAR IS COLD IT DOWN SHIFTS PROPERLY WHEN DRIVING FOR A WHILE SECOND TO FISRT SHIFT IS HARD Needs to relearn shift stratagies. May need scan tool help ...

to replace a canister purge solenoid valve 300m chrysler it is bolted to a bracket near the air cleaner it has top marked on it it wont work if you put it the  wrong way but what is the code

P1776 Low Rev sol switch valve stuck doesn't do it all the time once in a while Problem with a solenoid in the transaxle.Check with the dealer for a service bulletin.

...enough to clean it, not every time. I suppose you can easily find used one to replace yours valve body(or just solenoid pack) and check. But I would repeat, you need error codes and theirs ...

...solenoid is inside the transmission. The drain pan must be removed with the fluid. The filter and valve body unit also need to be removed. Unless you are really handy and have tools, I would get it ...

...solenoid switch valve latch in lower position. Don't know what it means but that's what database say's P0700 is what Yadawho said. You most likely have this code because of the 1776 code . Take ...