Questions & Answers for: Samsung sp cable

What cable to use When connecting PS-42C91H to my PC? I used a standard cable but the tv option remains Disabled! More info.

sp-r4232 completly dead standy voltages down to 5 volts are ok. Remove the power supply cable to Y Main board, check Vs on power supply board when you turn on tv. 1. If you have normal Vs, replace the

SP P4251 Bad color and red appers on left side of screen about 2 inches wide by 12 in. long.It comes in and out every so often Can I reset the color or fix this? What component(s) are you connected to

...sp-s4243 I am trying to get my pc to show on the TV screen, I have connected the cable but I get no signal...Can ya help??? You need to set the TV to input from the source that the computer is ...

...sp lock" wot is the factory code...i have tried 00000000 but is wrong....only got 5 trys left....HELP!! star 2767star3855hash will clear all back to factory settings let it stand for 1 min after you ...

I'm looking for a Samsung SP-P300ME DLP Projector I'm looking for a Samsung SP-P300ME or SP-P310ME DLP Projector PC/Composite Cable try online.projectordoctor.com

...SP-S4243 up do hdmi cable but it won't display full screen. Sounds like the cable box is outputting in 4:3 rather than 16:9, it should also output in either 720p or 1080i/1080p. Check the settings on ...

I have red dots/sparkle in black or dark areas of the picture (this affects all devices, which are connected to the tv through a single HDMI input from my home theater system) most likely the HDMI ...

...SP-H03 for workshop. Should be easy right? Just comes up with check cable connection. I'm not to mac savvy... It's not that easy. The SP-H03 accept VGA input through the D-Sub connector. Mac ...

...sp-r4232 shows good but when I plug up the cable wire it looks ugly what could be the problem You plug the cable wire into the cable box and then hook up the cable box to your TV through HDMI or ...