Questions & Answers for: Yamaha spin a win

I have a whining noise on deaccelaration only, pulling in clutch doesn't change it. Sounds like something is still spinning with clutch in. it may be the shaft drive winning like the rear end on a ...

My starter spins but doesnt engage It whines like the starter is spinning . If you let it spin long enough it will start the bike. another post with the same problem was told to replace the starter. ...

Does the fan on back plate of the DVR-S150 spin continously Does the fan on the back plate of the DVR-S150 spin after the DVR heats up or should it be on continuously. It rotates one click clockwise ...

Yamaha dvr-s120 can not read dvd or cd. Drive is not spinning. The CD motor could be faulty if you cannot hear any spinning noises from it from it loading or the lens could be faulty resulting in not ...

2000 blaster i installed a new cluch cable and looks like its working i adjusted at the cluch lever still not working. mind do not tighten the cable there must be play in the lever. if the bike is ...

starter wont start bike it just spins when i try to start the bike all the starter does is spin Hi, Anonymous the starter drive/Bendix/clutch is a mechanical gear driven component that engages the ...

my starter just spins on my r6 Hi, Anonymous the starter drive/Bendix/clutch is a mechanical gear driven component that engages the clutch pack ring gear to turn over the engine. It has an internal ...

my starter just spins on my r6 Hi, Anonymous the starter drive/Bendix/clutch is a mechanical gear driven component that engages the clutch pack ring gear to turn over the engine. It has an internal ...

...starter clutch starter started going out dragging so bought new one installed it all it does is spin. put old one all it does is spin also now! what is the deal? pull clutch lever in wheel does ...

starter spinning wrong way bike would not start pull starter out got checked ok replaced relay still no good, new starter switch that was the problem the starter motor is spinning but not engaging so ...