Questions & Answers for: spoon position

...position. Could be the crank shaft. Had the same thing happen to me... kinda sounds like a spoon in the blender? Looking at $400 for part and labor if nothing else has been damaged. But if the crank ...

...position. I started with the spoon closest to me and rotated clockwise. After 2 or 3 inches of travel, the belt should be mounted. From there, you'll need to push the belt onto both cogs by applying ...

...filter holder not pushed far enough ino lock position, also the basket doesn't quite hold 2 level spoons of coffee. Thanks, ...

...position so the door will not close. When trying to close the door, the door just bounces of the post that the latch is supposed to close around. So, I can not get the door closed. Thanks for any ...

...position. This is the answer I got from Presto. I cleaned it with window cleaner, wooden spoon and paper towels. Dish works great now. Buzzer sounds when heater: - is tipped - rests uneven on floor - ...

...picture of the tool so we know what we are looking for? ;-) just use a dull butter knife or end of spoon to gently pry it up in a few positions as you go around. i've owned one for 5 years and do it ...

8 oz of butter is what portion of a cup. or how many table spoons? 8 oz is half a cup 1 oz of butter is 1 tablespoon There are 16 tablespoons in 8 oz. 1 tbsp = 1/2 oz If this was helpful, please ...

...spoon stuck under it. If this float is stuck/hung-up in the UP position, it won't allow water to flow, as it senses that the water level is already at maximum. Try to lift yours and see if it freely ...

...the black panel that hold the glass (push clips). If you don't have the proper tool, use 2 metal spoons to lift the needle from the speedo face. You use the bowl of the spoons on the needle and ...

...position , pressing the electric control does nothing . we had a spoon fall into my mom's. turn it over and check that there is nothing stopping it from working the other think I would check is to ...