Questions & Answers for: Honda stan by

...but none apply such as a crank sensor code and a egr code which this car is not equiped. thank you Stan I would have this checked again. if you use the wrong software in a scanner it will give you ...

...Is it a radio issue or a cable wire, fuse, antenna issue? Can't live without my radio. Thanks, Stan more than likely an antenna

...and viper end can , and how many turns out on fuel mixture screw. ( lost my instructions) thanks, stan. HI A DYNOJET KIT INCLUDES MORE THAN JUST MAIN JETS, AIR CORRECTORS, SLIDE NEEDLES, AND IN

...how to remove the slow running carb jet the bike runs well at 3000rpm but erratic on slow speed Hi, Stan for this scenario you will need your service/owners manual if you can't find the best tool you ...

...really tired of going to town and straight into my workshop every time I use it... Thanks a lot! Stan you sure that the needle isnt

wobble front end wobble you need to put the bike up on its center stand and check the triple tree bearings for wear and tear. i.e. grab the front wheel while facing the bike and gently give a tug to ...

no speedo wheel pickup working fine .speedo jumps once awhile but then quits Hi, If it is a cable driven speedo it could be that the cable has worked loose from the back of the speedo and the centre ...

How do I convert a Honda SL125 to a 12 volt electrical system? I would suggest you try to obtain an alternator for a later Honda with a similar engine but there are many problems involved in this sort

my honda firestorm keeps blowing the headlight fuse when i turn the ignition on Hi, If the headlight is normally illuminated as you switch on the ignition ( i.e. for safety/ visibility ) it may be ...

My low beam has suddenly stopped working , tried changing the bulb but no change. High beam and pass are fine. Any ideas as to what it could be ? Cheers. stan.. Have you checked fuses?