Questions & Answers for: stand mixer bowl turning

Question about KSM90 Ultra Power Series Stand Mixer

1 Answer

stand mixer with the lift bowl you have to put a dime on the side of the bowl at the base and see how much clearence is needed to be taken away. if the dime gets moved the mixer is ok. if not take off

Ad

Question about KP2671 Professional 6 Series Stand Mixer

1 Answer

bowl Is this piece that is inside the stand that connects to the handle and in turn raises and lowers the bowl called a planetary planetary is the mixining action which was started by kenwood on there

Ad

...stand mixer is not the tilt model, rather there is a handle on the side that raises or lowers the bowl. The problem is that the paddle beater is banging on the side of the bowl. I have adjusted the ...

Question about KP2671 Professional 6 Series Stand Mixer

1 Answer

bowl is being scraped by paddle on stand mixer. how do i adjust it? There is a screw that turns about 180 degrees on the stand behind the bowl that fine-tunes the height of the paddle.

...stand. Turn the mixer upside down and look up inside the stand which is hollow. You will see a screw. Tap the pin back into position and then tighten the screw. Now to fix the drooping, and I assume ...

Question about KSM150PS Artisan Series Stand Mixer

1 Answer

...mixer there is an adjusting screw on the frame of the stand behind the bowl holder mechanism. It rurns a cam which adjusts the height of the mixer. See pg. 13 of the owners manual for bowl height ...

Question about 450 Watts KM25G0XWH Stand Mixer

1 Answer

...stand mixer. 2. Place bowl lift handle in down position. 3. Attach flat beater. 4. Adjust so flat beater just clears bottom surface of bowl when in lifted position by turning screw (A) ...

Question about K45SS Classic Stand Mixer

2 Answers

...off the base. Sounds like "magilla the gorilla" put it on the base. Just keep at it. You might try putting some ICE in the bowl to "shrink" the bowl. the stand mixer cant be used for more than four ...

Question about K45SS Classic Stand Mixer

1 Answer

...stand the bowl is stuck on the stand and will not detach The only way to unstick it is with more energy. Get someone to hold the motor unit firmly and someone else turn the bowl anti clockwise. There ...

...stand mixer and the Glass bowl slider will not slide under the plastic stand holders I placed the bowl on the stand like the directions say turn clockwise but the little feet won't side under the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Food Mixers Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39386 Answers

Are you a Food Mixers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...