...standard does not support them. Windows device drivers that are labeled as SATA are usually running in IDE emulation mode unless they explicitly state that they are AHCI. While the drivers included ...
...standard IDE controllers (Not Primary nor Secondary)7) Reboot and enter your BIOS8) Change to AHCI mode9) Boot to Windows… , if you success you will not meet the Blue Screen and Windows will ...
Question about LaserJet P2015 Printer
...AHCI Controller IDE Controller Ricoh Memory Stick Host Controller IDE Controller Ricoh SD Bus Host Adapter Storage Controller AKFRN04X IDE Controller Storage Controller MagicISO SCSI Host Controller ...
AHCI has benefits above standard ATA mode that increase performance. Microsoft® Windows® XP does not support AHCI mode by default, which causes the STOP 0x0000007B error message if AHCI mode
standard used for storage devices while AHCI is an application programming interface for the newer SATA interface.2.Most SATA controllers allow you to choose between AHCI and IDE among other operation
AHCI) http://support.microsoft.com/kb/952951 CD-R drive or CD-RW drive is not recognized as a recordable device http://support.microsoft.com/kb/316529/ Hardware devices not detected or not working - A
Question about Dh-16a3s & Lite-on Dvd/cd Rewritable Drive Sata 5.25"
AHCI) http://support.microsoft.com/kb/952951 CD-R drive or CD-RW drive is not recognized as a recordable device http://support.microsoft.com/kb/316529/ Hardware devices not detected or not working - A
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions