...armature from the magnetic switch. Toseparate the starter housing from the magnetic switch assembly, remove the two screws and the starter housing with the pinion gear (1.6 kW), idler and clutch ...
armature inside the starter. (unless you don't hear the distinctive click of the solenoid.) If this is the case, and it makes no noise whatsoever, there is either a worn brushes inside the starter, or
...armature not releasing to retract into the starter after starting...this grinding means the starter is not disengaging from the flywheel...sometimes installing shims to shorten the engagement length ...
...starter commutator may have a dead bar which means that the current will not flow through the armature making it turn. This can be checked by taking a jumper lead and momentarially shorting between ...
...armature) or a new starter may be in order. The problem shows as described when the brushes sit directly on or partially on the dead bar as it is an open circuit. Repeated attempts to start move the ...
Usually answered in minutes!
1,828 Questions
1,753 Questions
1,565 Questions
1,303 Questions
1,231 Questions