Questions & Answers for: Toyota Corolla starter armature repair

...starter will sometimes fail to turn over when hot because the armature bushing expand and are too tight for the armature to spin. At this point it is time for a new or rebuilt starter. Shielding it ...

...starter replacement If you like doing your own repairs, I'd like to recommend having a Haynes service manual on hand; it will give you all the info you need to do home-based repairs: '92 Toyota ...

...depends on who you go to and what the charge is to repair. The battery sends power to the solenoid, the solenoid kicks power to the starter to turn the starter for your engine to start. Good ...

cause i thought that was the problem, but is does the same thing, I would like to know if it is the starter or the starter relay? thank you in advace!!! It is a starter problem. But before you get the

...repair place might have thought the starter solenoid (which supplies the serious electricity to the starter motor) was sticking "on," but that's unlikely. Those solenoids usually fail in the off ...

...armature properly to make good contact after the armature stops spinning from it's last start. Some times the shock of banging the starter will shift the brushes enough to allow it to start the

...used on some Toyota products. Here is a very good site that explains the repair procedure, or you can just have the starter assembly replaced. ...

...starter commutator may have a dead bar which means that the current will not flow through the armature making it turn. This can be checked by taking a jumper lead and momentarially shorting between ...

...starter motor are a unit. You could attempt to repair the solenoid but most technicians would go ahead and replace your starter (the solenoid and the motor). However, having said that it is important ...

How do you Replace ground wire to starter on 98 Corolla ce From what I can tell the connection is broken going from the car to the starter. (A friend who works on cars on the side believes this to be ...