Questions & Answers for: starter spins wont start

starter wont stop spinning the starter on my 2001 ford expedition wont stop spinning after it starts the engine.... the only thing i changed was the soliniod after the starter wouldnt spin at all.... ...

...starter it spins but wont kick in to turn over what can i do to get it started? If when you jump the starter with a screwdriver & it spins without engaging the flywheel - I would say with ...

wont turn over? Your description is a bit misleading.  Is the starter spinning or is it just making a clunking sound when the key is turned to the start position?  If the starter is spinning

...starter wont stop spinning after engine is started? starter starts engaging while driving down highway!!it will stop then start spinning again at random. Hi Scott, please be aware that this question ...

...push the start button the starter spins but does not engage Check all your connections to starter and battery. If all connections are tight and the starter doesn't engage, it's time for a new

...circuit is working. If the starter spins the high current circuit is also working and that leaves the above that the starter drive is not working to engage the starter with the clutch ring

...starter spins but wont start engine Hi, Anonymous the starter drive/Bendix is a mechanical gear driven component that engages the clutch pack ring gear to turn over the engine. It has an internal ...

WONT START THEN IT WILL START I CHANGE THE BATTERY If you thought it was the battery, I'm guessing that what you mean is sometimes it will spin the engine and start, while other times it will not spin

...starter motor is spinning but not engaging so put new clutch gear in still wont engage looking a million times at it the clutch gear is spinning the wrong way. starter motor is spinning clock wise ...

starter spinning freely but wont engage engine to start if it did it starts up fine. Sounds like your pinion/bendix gear is not reliably extending fully to engage the flywheel. There are three common ...