...and get about 25 miles and the spedo screen is blank, and she starts to cut out, ive heard the stator and rectifier on these bikes have been on a recall??any infor would be great!! yes and yes. ...
...not working? i have been told it could be this? The 2004 models have a problem with their generator stator.They have the light always on and the generator tries all the time to charge the battery in ...
Question about 2005 CBR 1000 RR Fireblade
installing a new stator on a 2005 honda cbr1000rr Do you know for certain that the stator is bad? Quite possible of course, but the R/R is a much more common failure. The R/R used on later gen CBR1000
runs hot and stator went bad is there oil in the engine do you have coolant has the oil been changed need more info mate what gets hot the engine or stator get back to me buddy
Question about 2005 CBR 1000 RR Fireblade
...front fairing. The tilt switch kills power to the injector banks. Hope this info helps. It's your stator coil. I promise you - I've had this problem and it's a known fact that the 2005 Blade has a ...
...discussions/Rumours around Honda who had a "recall" on their 05 Fireblade's due to faulty Stators. My pride and joy is now standing in the garage due to a faulty Stator. I live in Ireland ...
Question about 2004 CBR 1000 RR Fireblade
Replaced battery on 04 CBR1000, riding for 30 minutes stopped in store and bike would not start (not holding charge) jumped started, while idle noticed MIL on and bike shut down/stopped. Towed bike ...
...with one lead grounded, touch an alternator pin ohmmeter should read infinity, if not replace the stator. 10. With both leads touching alternator pins, multimeter should read 0.1 to 0.2 ohms on
Question about 2008 CBR 1000 RR Fireblade
...inspected, no obvious damage, fuses are good and relays switched out with no change at all. Checked stator and rectifier, both tested around 14.43 V at 2,000rpm and 5,000 Im thinking Harness or cam ...
Question about 2005 CBR 1000 RR Fireblade
...u zou ongeveer 13,2-15 DC Volts moeten lezen. 3. Aansluitingen en draden: Controleer de statorstekker van de regelaar en controleer de batterijklemmen voor aansluitcorrosie. Als alles in ...
Usually answered in minutes!
72 Questions
50 Questions
44 Questions
45 Questions