Questions & Answers for: stripped nut

...nut and a stripped locking lug nut and i cant break neither one losse what should i do If you have a socket you are willing to destroy, Find a socket that is as close to the size of the lug nut, but ...

...nut that you unscrew to drain the oil, for oil changing. It is stripped to hell, and i have tried "Gator Grip", fairly large plyer, and typical wrench, use vice grips they lock on tight or a pipe ...

...stripped lug nut with a hammer and the grip on the lug nut gets tighter as you loosen the nut. As long as the lug nut studs are ok, you should be able to just replace the stripped lug nuts. You can ...

...nut is stripped. I tried a gator socket but The nut is stripped. I tried a gator socket but it just doesn't grip. Any suggestions? Nut that holds what part together? Have you tried a stripped nut ...

...nut is stripped enough is to grab a socket one size down from the size of the nut and hammer that ****** onto the stripped nut and then twist it off. Or your third option would be to cut em off and ...

rear brake line: stripped 11mm nut that is attached to wheel cylinder, how do i remove the stripped nut to replace the wheel cylinder take vicegrip and pull it while you turn the nut

how can I can change a stripped bar nut on my husqvara chainsaw the bar nut is stripped, can I use something else they have a socket set call turbo sockets it locks onto striped nuts

...we are replacing trying to take off front nuts holding starterin place nut is rounded and stripped wont come off go to a parts store and buy what they call turbo sockets sears sells them as ...

...while trying to un-tighten it I stripped it :/ wedge something in-between the nut and what its holding like a flat head screwdriver this will give you leverage to allow the nut to move onto good ...

I stripped the head of the shaft end bolt of my Frigidaire front load washer. How can i get the bolt out ? There is a special socket set made for stripped nuts and bolts. Sears sells it. There are ...