Questions & Answers for: strut install

...Install or connect the following: Strut and tighten the strut to body bolts to 59 ft. lbs. (80 Nm). Strut to the steering knuckle and tighten the bolts to 156 ft. lbs. (211 Nm). To install: Install ...

Ad

...strut tower. Install the carpeting back on top of the rear strut tower. Raise and safely support the vehicle. Install the knuckle into the clevis bracket on the strut assembly. Install the 2 clevis ...

Ad

Question about 2002 Cougar

1 Answer

...the spring seat. Reinstall the thrust bearing retainer nut. Tighten the nut to 44 ft. lbs. (59 Nm). Install the strut assembly into the you will need a strut spring compressor which cost about 50 ...

...also, then you will need strut spring compressors, compress spring, remove top retaining nut, then remove old strut install new strut tighten retaining nut release springs and install back on

...strut and install it on a new one (less expensive but you must have access to a spring compressor). Make sure when installing the spring that it is aligned correctly on the new strut. A compressed ...

Question about 1990 Accord

1 Answer

...strut and install it on a new strut (less expensive but a lot more work, and you must have access to a spring compressor). Make sure when installing the spring that it is aligned correctly on the new ...

Question about 1994 Intrepid

1 Answer

Install the tension strut into the strut bushing in the control arm. Position the tension strut in the control arm with the word FRONT stamped in the tension strut positioned away from the control arm

Question about 1994 Intrepid

1 Answer

...INSTALL STRUT INTO THE STRUT TOWER ALIGNING THE PAINT MARKS MADE DURING REMOVAL.INSTALL UPPER MOUNTING NUTS AND TIGHTEN TO 34 - 46 FT LBS. INSTALL STRUT TO KNUCKLE BOLTS TIGHTEN TO 55 - 61 FT LBS. ...

...strut assembly up into the spring and reposition the top mount onto the spring in the same position that it was removed. Install the retaining washer and top nut. Tighten the top nut to the ...

Install the strut-to-body bolts and tighten to 34 ft. lbs. (46 Nm). Install the strut to the knuckle, aligning the scribe marks and tighten the bolts to 133 ft. lbs. (180 Nm) for 1988-94 vehicles. For

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...