...amp to the positive on one sub then run a wire from the first subs negative to the second subs positive the run from the second subs negative to the amps negative and bam 2 ohms but be warned this ...
...subs to my amp i have a phoenix gold 5.0;4 amp ans two mtx 12 inch 4500 sub woofers in a sub zero double ported box whats the best way to hook this up? front or rear channel? should i bridge the amp? ...
Question about R15.0:1 1500W Octane-R Mono Amplifier Car Audio Amplifier
...amp to subs Hi, I just bought 3 15 inch Rockford fosgate Dual 4ohm subs and the Phoenix Gold Octane R 15.0:1 Can you give me the wiring for the subs and than when the subs are on the outside of box ...
Question about Xenon-200.4 Car Audio Amplifier
...subs. Boths sets of speakers can handle 450w. Which set of 12's would be best to hook up to this amp, and should I bridge them down to half the amp, or bridge one speaker to half the amp, and the ...
...subs. Boths sets of speakers can handle 450w. Which set of 12's would be best to hook up to this amp, and should I bridge them down to half the amp, or bridge one speaker to half the amp, and the ...
Can i hook up a powered 12'sub to a Pheonix Gold xs2500 amp without blowing the speaker First I hope you remove the speaker wires from the speaker that come from the built in amplifire. You cannot ...
Question about RSD600.1 400W x 1 Car Amplifier Car Audio Amplifier
amp not working, subs just thumping I have a Phoenix Gold Rsd 600.1 amp and the other day i turned on my truck and the subs went haywire and just started thumping repeatedly , i tried with another sub
Question about Xenon-600.1 Car Audio Amplifier
amp was working fine. i disconnected the sub for a while and the amp would turn on and then protection light started blinking and now wont run a sub. is there a way of reseting the amp? what causes ...
I have a Phoenix gold 180x2 bridged to one 10" subwoofer and I wanted to know how to configure the pre-amp inputs. My head unit has two pre-amp sub outputs (left and right) since I am only driving the
...through it, its just that no sound is coming from the subs and the light on my amp isnt on. You need power to the amp. If the light on the amp is not on then your amp is the problem. Get power to
Usually answered in minutes!
19 Questions
11 Questions
12 Questions
7 Questions
2 Questions