Question about 2005 GSX 1300 R Hayabusa
...suzuki is slipping is this dangerous -first thing to do is make sure the shifting lever is tight and not striped any.and a stupid quistion is have you changed you riding boots are shoes lately? if so ...
splitting hayabusa forks trying to split forks to change seal and damper rod bolt will not come out. it is turning but will not loosen, can you tell me what im doing wrong. no. but go here for a free ...
...pressures for a 2007 Suzuki What are the best tire pressures for a 2007 Suzuki Hayabusa and how many quarts of oil does it hold? 27 psi front and rear and it takes 4 litres inc oil filter change ...
...suzuki 1300 hayabusa cranks and runs great but smokes alot of white smoke Crankcase oil is getting into the combustion process. Check the following: Crankcase oil level - make certain it is not ...
Suzuki Hayabusa (1999 model) seems to be over fueling and back firing. It was running rough until 3,000 revs then it would take off and now runs rough all the time. It has put petrol into the oil. Its
Question about 2008 GSX 1300 R Hayabusa
...Suzuki GSX 1300 R Hayabusa engine knock under load I have a 08 busa that I drag race with about 3500 miles that just got rebuilt about 1000 mile ago (due to a bad oil pump ) I hear a knock in the ...
what temp does the oil cooler fan come on? no oil cooler fan mate just engine, about 88 degrees
fork oil capacity for 2003 gsx1300r you do it with an air gap, call dealer mate
forks knocking Front forks have knocking noise even though they have been rebuilt twice by specialists. are you sure it is the forks, I have a 99 and it clunks like hell and it is the fairings the ...
Question about 2006 GSX 1300 R Hayabusa
...on the links below. Good luck and have nice a day. grinding gears Tranny problems on 07 Hayabusa Suzuki GSX1300R Manual OEM parts for Suzuki Suzuki GSX1300R Owner ...
Usually answered in minutes!
41 Questions
41 Questions
25 Questions
22 Questions
22 Questions