...Suzuki Marauder 125cc As always, correct pressure depends on the tyre fitted but if it is running with the standard tyres that it had fitted from new then: Single rider: Front is 1.75 bar (25 PSI) ...
...Suzuki forks. The speedometer may also be a factor because the old cable may not fit the new hub. Try a salvage yard. Google " motorcycle salvage suzuki " and see what you can find/ Can I get a ?very ...
need diagram for front brake assembly Try here: http://www.motorbookguy.com/Suzuki_GS125_GS125ES_GN125_GZ125_Marauder_DR1_p/m888.htm
...front forks of a motorcycle It is a long process, but if you have the patience and skill you can do it else better get someone to do it for you either your friend or a dealer. Research what parts ...
...front brake on a GZ125? Need to change the pads and I can't see which bolts to take out. http://www.cmsnl.com/suzuki-gz125-2000-cy_model13790/partslist/ Go to the above site and scroll down to the ...
gear lever doesnt click - cant change out of 1st Gear lever doesn't click - can't change out of 1st lever is not loose clutch works suggestions on taking it apart? The problem is a bent shift fork. ...
My suzuki gz marauder won't go down into first or neutral..kick all way down but starts off in second gear..keep stalling at busy junctions. The bike has a bent shift fork. The engine will need to be ...
...front sprocket also is it a reverse thread hi, dont know what bike you are working on, however all modern suzuki use a normal rh thread for tightening. put the bike in gear press down on the rear ...
What type of oil do I use for the front forks?I need to know the type or name of the oil for the front forks? take contact with Castrol! ASK- Castrol Fork Oil
Question about 2003 GZ 125 Marauder
...forks from a suzuki marauder 125cc on a 2011 125cc marauder Can the forks fit the later 2011 model? Maybe- are the diameter of the fork legs the same and are the fork leg measurements the same centre ...
Usually answered in minutes!
51 Questions
28 Questions
17 Questions