Question about /proform Treadmill Drive/motor Belt 118016
i have a nordic track c2255 - having belt issues when I run(i am 200 lbs and the belt skips) i think the tread is properly adjusted - I took the cover off and noticed two idler arm spring settings - a
Question about NordicTrack Treadmill, A2550
I have a C2050 and the treadmill will not go flat on the incline setting. It says it is 0.0 but it is not can you help me fix this problem. If the incline motor does move, try the calibrating process.
Question about NordicTrack Treadmill, A2550
My Nordic Track 1300 Commercial elliptical makes a loud clicking sound on the left side as the left pedal returns from front to back. What is the fix for this? Dear Sir: Thank by your request, I hope ...
recumbant bike slips while peddling changed belt (not problem) http://www.youtube.com/watch?v=mVJxs7ALxDM&feature=relatedLoose Pedals1Kneel next to the left side of the elliptical's base. Use ...
Question about NordicTrack Treadmill, A2550
NordicTrack SL710 pedals slip and make a clicking noise? 1 Kneel next to the left side of the elliptical's base. Use the Phillips screwdriver to tighten the two screws located in the center of the
Question about NordicTrack Treadmill, A2550
I have a NordicTrack SL710 recumbant bike that the pedals slip and make a clicking noise? Kneel next to the left side of the elliptical's base. Use the Phillips screwdriver to tighten the two ...
crank on a Nordic Track cx1050 I need to replace the crank arm on my Nordic Track eliptical CX1050 I have the covers and pedals off and pulled the bolt out of the center of the axle. I don't ...
...crank axles, then reattach the ends of the pedals. 2 Remove the bolts connecting the pedals to the swing arms. Detach the pedals from the arms, then spread a layer of machine grease over the axles
Can't remove right pedal shield How do I remove the right front shield? The shield will not come off unless you remove the entire crank, not just the pedal. to do this, you need to buy a CRANK ARM ...
how to remove crank arms from nordictrack gx 4.2 How to remove crank arms most bicycle shops have a tool called a sprocket remover. you remove the nut.it threads in the hole then you turn the handle ...
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions