Questions & Answers for: Precor swing arm

There is a squeeking sound when it's being used. I have tried lubing the belts with belt dressing but it works only temporarily. Sorry to say its time to replace the belts You may purchase them ...

battery has been replaced but the keypad only lights up for a second when you start pedaling....it then continues to flash on and off....no error code given My Precor Elliptical EFX 546 Timer Stops ...

my precor efx 544 has stopped recognising that i am using it. does not display strides or calories burned. any ideas? My Precor Elliptical EFX 546 Timer Stops After 7 Seconds, what is wrong? The most ...

when peddeling there is a squeeking noise in the rear Try lubricating the moving points in the rear. I would start with the connection at the crank arm and stair arm. If lubing does not help, you may ...

Trying to fix a 20+ yr.old treadmill (Precor USA 9.4sp) that won't turn on...it gives me a slight shock when I click the on/off switch. Dear Sir: I hope you are very well, in union with your ...

efx time out after 7 sec My Precor Elliptical EFX 546 Timer Stops After 7 Seconds, what is wrong? The most common cause for the Timer to Stop After 7 Seconds on a Precor Elliptical is NO RPM Feedback.

my precor keeps saying start pedaling The most common cause for the Timer to Stop After 7 Seconds on a Precor Elliptical is NO RPM Feedback. Knowing the status of the unit from its last use as well as

...crank axles, then reattach the ends of the pedals. 2 Remove the bolts connecting the pedals to the swing arms. Detach the pedals from the arms, then spread a layer of machine grease over the axles

Can't remove crank arm How do you get stuck crank arm off Replacement Parts for Fitness Exercise Equipment at SPORTSMITH This crank arm is a pressed fit. You will need a 2 jaw puller to remove this ...

clunking noise precor 5.35 Hello check for slop in the left and right hand side arms and foot tubes. I'd tighten every bolt you can find. GymWorld.net.au